In our office, there are a handful of dictators vying for power, and yes, they know who they are. They run roughshod over the whole office, seizing control, forming alliances and flexing more muscle than Mussolini in pre-war Italy. Because of the internal power struggle, there is more drama, intrigue and manipulation than in an episode of Game of Thrones as hopes are raised then dashed, and the struggle for control reaches a literal fever pitch.
What is the object of their desires? What do they wish to control beyond anything else? The office thermostat. Since the advent of modern history and the birth of Willis Carrier (of Carrier Air-conditioning fame), I feel I am safe by saying there is nothing that has affected more lives, created more tension and led to more divorces than the temperature control on a heating and air-conditioning unit. The problem is some like it hot and some like it cool, and they are willing to do anything to get their way.
When it comes to your elevator machine room, there is also a temperature struggle, and the consequences of that brawl may be more significant than just a little discomfort or office politics. The challenge is keeping the temperature inside the machine room within the set standards. Elevators need consistent temps and therefore, the thermostat needs to be a priority. Some sources note that temps need to be between 60 and 90 degrees Fahrenheit and this is backed up by the National Institute of Standards and Technology in a report entitled “High Temperature Operation of Elevators.”
But is that rule of thumb always the best for optimal temps for elevator operations? If you get it wrong, setting the temp too high or too low, it can lead to inefficiency in operation or ultimately even complete shutdown.
For a more reliable source, we should turn to the American Society of Mechanical Engineers (ASME). They literally wrote the safety code for elevators and machine rooms and is the most reliable source for elevator operation. Their code calls for there to be a natural or mechanical means to keep the air temperature and humidity within the guidelines of the manufacturer. So what do you do, as the required temperatures can vary depending on who produces the elevator equipment? The code still has the answer. It requires that inside the machine room, permanently posted, there must be a sign that shows the temperature and humidity range for that particular machine.
Especially with summer heat on the horizon, now is the time to make sure the machine room air-conditioning and heat is in proper order and the temp and humidity fall within the proper parameters. If you have any specific questions or concerns, make sure and consult your elevator technician.
As for the office thermostat…buy a lock box, set the temp the way you like it and swallow the key. Remember the hand that controls the temperature controls the office.